A Guide to Find the Best Weight Distribution Hitch for Your Trailer

Without a weight-distribution hitch, towing a hefty load can pose to be a challenging and painful process. Other than the dangers of roads, the hazardous weather conditions, and even the very process of towing a camper can cause a whole new world of challenges.

If you have a highly durable option like the Blue Ox weight distribution hitch, you won’t ever have to worry about that occasional sway while on the road. So, how do you find the best weight distribution hitch for your trailer?

How to Choose the Right Components?

Trailer Ball

The trailer ball is the threaded stem that connects the hitch to the ball mount. They are available in different sizes, and you can choose one which will match your complete set-up. When you are not towing your trailer, you can leave the set-up in place instead of dismantling them.

Safety Chain

The safety chain helps connect the tow vehicle and the trailer. Instead of one, you can choose to use two safety chains for precautionary measures.

Once you choose a weight-distribution hitch, your responsibility does not end here. While you are towing any vehicle, you have to take extra precautions, keeping everyone’s safety in mind.

However, other than manual precautionary measures, choosing the right WDH also plays a significant role in your safety.  There are some things a WDH can do to help mitigate the chances of your trailer tipping over on the expressway.

Sway Control

While towing, if you are experiencing any trailer instability, you probably require sway control WDH. Specific weight distribution hitches like the Blue Ox weight distribution hitch have a best-in-class sway control system to balance excessive swaying while out on the road. Such hitches may also come with adjustable torsion bars for extensive use.

You can go for hitches with built-in sway control, or if you already own a hitch without a sway control, you can add the system in the future as well.

Pre Installed Components

A few models offer hitches that are already complete. If you purchase such models, you need not buy additional hardware at any point in time. Look for models that come with all components for ease of installation.

Hitch’s Capacity

The tongue weight can range from 1000 to 1200 pounds. The gross trailer weight can be between 10,000 and 12,000 pounds. While buying, check the vehicle manufacturer’s manual to figure out what type of hitch you will need.

Ease of Installation

Choose models that will not give you a hard time when it comes to installation. It should take up only a short span to complete the entire installation. The average time to assemble a hitch can range from thirty minutes to an hour. If the process takes more than one hour to complete, then that is an inconvenience.

Cost of the System

A sturdier model will naturally cost a little higher compared to the rest. Such models offer high-quality as well as a good warranty on different parts. If you invest in such models, you need not worry about any damaged or malfunctioning parts.

It can take forever to find that right weight distribution hitch for your trailer if you don’t know what you are looking for. Carefully weigh each of the components’ pros and cons and choose the suitable model that befits your trailer. 

The post A Guide to Find the Best Weight Distribution Hitch for Your Trailer appeared first on Travel Experta - Travel, Lifestyle, Freedom.

* This article was originally published here